Digital Medical Gas Alarm
Digital Medical Gas Alarm
- GAS: OXYGEN (O₂)
- HIGH(ALM1): ≥ 66psi
- LOW(ALM2): ≤ 49psi
- GAS: NITROUS OXIDE (N₂O)
- HIGH(ALM1): ≥ 66psi
- LOW(ALM2): ≤ 49psi
- GAS: MEDICAL AIR (AIR)
- HIGH(ALM1): ≥ 66psi
- LOW(ALM2): ≤ 49psi
- GAS: CARBON DIOXIDE (CO₂)
- HIGH(ALM1): ≥ 66psi
- LOW(ALM2): ≤ 49psi
- GAS: NITROGEN (N₂)
- HIGH(ALM1): ≥ 190psi
- LOW(ALM2): ≤ 120psi
- GAS: VACUUM (VAC)
- LOW(ALM2): ≤ 400mm Hg
Features
- Monitor medical gas piping pressure and alarm specified unusual situation
- Designed with individual microprocessors and led digital readout
- ON/OFF:Pressure《ON/OFF》to select alarm start or close down
- Operation:Button --《↑》《↓》《UNIT》《SILENCE》《ON/OFF》
Switch -- TACT SWITCH
Default pressure -- S1 & S2
Pressure set -- pin header
- Display Character:0.5" red LED character, four-figure
- Pressure Sensor:Ceramic Disc Capacitor, 1/8NPT, PG7, fly wire 30 cm
- Dual Alarm:Audio Alarm -- buzzer 40~50 dB
Visible Signals -- green light "NORMAL" and red "HIGH" or "LOW" condition
- Input Power:110/220V AC, switching power supply
- Dimension:W 63mm x H 96mm x D 63mm (W83mmx H 140mm x D 63mm including cover plate)
Pressure Range and Unit Switch
|
Positive pressure |
Negative pressure |
unit |
PSI |
BAR |
Kg/cm² |
kPa |
mmHg |
inHg |
kPa |
code |
U1 |
U2 |
U3 |
U4 |
U5 |
U6 |
U4 |
range |
200.0 |
12.00 |
12.00 |
1200 |
760.0 |
30.00 |
100.0 |
increments |
0.2 |
0.01 |
0.01 |
1 |
0.5 |
0.02 |
0.1 |
Medical Division Nitrogen Control Panel
Nitrogen Control Panel NC-200
- Inlet pressure gauge:0-300 psi (0-20kg/cm²)
- Outlet pressure gauge:0-200 psi (0-15kg/cm²)
- Adjustable working pressure:0-150 psi (0-10kg/cm²)
- ON/OFF valve
- Line regulator lockable
- Outlet quick connect:DISS N2 (CGA1120) or female Schrader Air Coupler
- Aluminum decorator frame with statin metal panel to which all controls shall be mounted, fasten to the control panel box, dimension W232mm x L 140mm
Zone Valve Box
- Gauge range
- oxygen 100 psi (7kg/cm²)
- medical air 100 psi (7kg/cm²)
- nitrogen 300 psi (20kg/cm²)
- vacuum 760 mm Hg
- The valve box frame is constructed of aluminum
Ball Valve
- 3 piece ball-type design, made by bronze
- Both side with extension type k copper tube 350mm length
- For size 1/4", 3/8", 1/2", 3/4", 1", 1¼", 1½", 2", 2½", 3"
- Working pressure:300 psi (21kg/cm²)
- This ball valve can be used on following gases:oxygen, nitrous oxide, medical air, vacuum and carbon dioxide
Manifold Header Hose
- Material:Teflon/SS
- Working pressure:4000 psi (280kg/cm²)